Chromatography Tubing
Trajan Scientific Tubing PEEKSil Yellow Medical 2/PK
1/16 OD x 0 175 mm ID x 750 mm length PEEKsil tubing yellow PK2
Trajan Scientific Tubing PEEKSil Green Medical 2/PK
1/16 OD x 0 125 mm ID x 400 mm length PEEKsil tubing green PK2
Trajan Scientific Tubing PEEKSil Red Medical 2/PK
1/32 OD x 0 1 mm ID x 200 mm length PEEKsil tubing red PK2
Microsolv Technology Corporation Tubing, PEEK, Pre-Cut, 0.005" ID, 1/16th" OD, Super-T Grade, Red Stripe, 10cm Long. 5 PK.
Properly cutting tubing is one of the most difficult tasks in a chromatography laboratory. These Pre-Cut PEEK Tubes are the perfect solution. This Super-T™ grade ( Premium ), PEEK tubing is extruded from virgin PEEK ( Victrex ) material without adding any additives. The broken red stripes are added only to the outside of the tubing, leaving the interior all natural PEEK which eliminates leachables due to color. The internal and outer dimensional tolerances of this tubing is +/- 0.025mm. Color Code: Red, Stripes for 0.005" ( 0.13mm ) ID. Pressure rating: 6100 psi.
Trajan Scientific Tubing PEEKSil Green Medical 2/PK
1/16 OD x 0 125 mm ID x 450 mm length PEEKsil tubing green PK2
Waters Corporation Tubing Assembly, Inject Out to HPLC Column, 0.005 x 11 in. long, HPLC fitting
Waters Corporation Tubing Assembly, Inject Out to HPLC Column, 0.005 x 11 in. long, HPLC fitting
Perkin Elmer US LLC 4 mm, Ultra Deactivated Single Low Pressure Drop Precision Liner with Wool
Inlet liners for split injection have mixing chambers with tortuous flow paths to allow full vaporization of the sample. Deactivating the surface of these liners prevents active compounds from degrading. Packing the liner with wool will trap non-volatile residue and prevent column contamination when analyzing dirty samples. Inlet liners for splitless injection are generally designed as straight tubes, although new designs such as the gooseneck will help contain the sample in the injector. Packing these liners with wool will also help trap non-volatile residue and prevent column contamination. For the capillary injector on the Clarus 590 or 690 GC system.
Microsolv Technology Corporation Tubing, PTFE, 0.010" ID, 1/16" OD, Low Pressure. 10 Meter Roll. 1 EA.
This MicroSolv PTFE ( Polytetrafluoroethylene ) Tubing is extruded from virgin PTFE, manufactured exclusively by DuPont. We do not add any additives to the original PTFE material, except for particles for color coding. This tubing is used widely in all low-pressure, laboratory applications including before and after an HPLC Pump such as with Mobile Phase Delivery and Solvent Waste Systems. Since PTFE tubing contains "micro-pores" in the tubing wall, which allows a quick air exchange, consideration for for use with degassed and oxygen-sensitive solvents is needed. Internal and Outer Dimensional Tolerance: +/- 0.20mm Color: Natural PTFE, Translucent ID: 0.010" ( 0.25mm ) Pressure rating: 800 psi.
Microsolv Technology Corporation Tubing, PEEK, 0.010" ID, 1/16" OD, Super-T Grade, Blue Stripes. 25 Meter Roll. 1 EA.
This Super-T™ grade ( Premium ), PEEK tubing is extruded from virgin PEEK ( Victrex ) material without adding any additives. The broken yellow stripes are added only to the outside of the tubing, leaving the interior all natural PEEK which eliminates leachables due to color. The internal and outer dimensional tolerances of this tubing is +/- 0.025mm. Color Code: Blue, Stripes for 0.010" ( 0.25mm ) ID. Pressure rating: 5600 psi.
Electron Microscopy Sciences PEEK Metal Polish 100 ml Tube Blister pk 100 ML
EMS is proud to introduce PEEK a complete new line of cleaning materials that not only cleans but polishes and protects all metals as well as fiberglass surfaces as well. It is available in 5 different packaging configurations.
Bellco Glass, Inc. L-Shape Sparge W/Stainless Steel Frit,15L For 10mm Port
Stainless stealL-Shaped Sparage With SST Frit has stainless steal frit with 10 micron porosity for introduction of gentle stream of air bubbles into bioreactor vessel beneath the impeller of mammalian cell culture. Fits into 10mm port on 15L metric headplate.. MADE IN THE USA